Pressure-pipe construction
Designed for water conveyance where the selected pressure class/SDR matches the operating conditions.
HDPE Pipe
HDPE Pipe for Water Supply
Plain HDPE pipe for water supply, irrigation and industrial fluid conveyance.
Infrastructure grade
Project-specific supply
Technical enquiry support
Product standard
IS 4984: 2016
IS 4984: 2016
Product overview
About HDPE Pipe for Water Supply
HDPE Pipe for Water Supply is a pressure-pipe solution used for potable/non-potable water networks, irrigation and industrial water conveyance according to the approved service requirement. HDPE is valued for its flexibility, corrosion resistance and ability to form long, continuous pipelines.
The pipe is lightweight for transport and can accommodate normal ground movement better than many rigid materials. Properly designed and joined HDPE systems can provide a smooth internal bore with low maintenance requirements over long service periods.
Pressure rating, SDR, diameter, raw-material grade, joining method and water-service approval must be selected from the actual project specification. Creator Poly lists this product as manufactured in accordance with IS 4984:2016.
Key product details
Designed around performance, protection & installation
Corrosion resistance
HDPE does not rust and is suitable for wet soil and water-network environments.
Flexible pipeline
Can accommodate route changes and normal ground movement with fewer rigid fittings.
Smooth internal bore
Supports efficient water flow and reduces internal roughness.
Technical information
Product specification at a glance
Use this section for preliminary product selection. Final dimensional and performance requirements should always follow the approved project specification and purchase order.
| Primary material | High-Density Polyethylene (HDPE) |
|---|---|
| Primary service | Water supply, irrigation and industrial water conveyance |
| Pipe form | Smooth-wall pressure pipe |
| Joining | Typically selected with compatible approved HDPE jointing method for the project |
| Applicable standard | IS 4984: 2016 |
| Design variables | Diameter, SDR/pressure class, temperature, flow and surge conditions |
| Project options | Size, pressure class, colour/stripe, marking and supply length to approved specification |
Exact dimensions, wall class/SDR, colour, marking, jointing and supply length are project-specific unless stated otherwise. Confirm the final approved data sheet before procurement or installation.
Advantages
Why this product is specified
No rusting or metallic corrosion
Flexible pipeline alignment
Low internal roughness
Lightweight transport and handling
Suitable for long water-distribution runs
Performance highlights
What to expect from HDPE Pipe for Water Supply
Corrosion resistant
Flexible and lightweight
Pressure-capable construction
Suitable for long-term water networks
Pressure-pipe application
Water/irrigation infrastructure
Selection & installation
Important project checks before ordering
The correct product is only one part of a reliable installation. Match the pipe, duct or accessory to the actual design load, service condition and joining method.
View Quality & Safety01
Select SDR/pressure class using maximum operating and surge pressure.
02
Confirm water-service requirements and material/marking acceptance for the project.
03
Use approved joining equipment and trained installers for pressure joints.
04
Pressure-test the completed pipeline in accordance with the project method statement before commissioning.
Explore the range
Related HDPE Pipe
Project enquiry
Need HDPE Pipe for Water Supply?Talk to our team.
Share the required size, quantity, application, project location and specification. The Creator Poly team can help you identify the most suitable configuration for your project.
Call us+91 9810961040
Email usinfo@creatorpoly.com
Send an Enquiry
We’ll use your details only to respond to this request.